Trinty 1k 1
Trinty 1k 1
Gzoom Full Shot 2
Gzoom End Connectors Close
Trinty 1k 3
Trinty 1k 1
Trinty 1k 2

The G-Zoom Custom Trinity Edition

$1,034.99

This custom ergonomic unit allows the steadicam operator to control the zoom while holding on to the Gimbal handle. It is custom fit to a variety of different stabilizers, choose your rig and place your order! connectivity is compatible with almost all Canon and Fujinon lenses. It also has the ability to control focus if you are using your newer Canon and or Fujinon lenses as they have focus servos built in! Focus Adapters sold separately!

***ATTENTION THERE IS A LEAD TIME ON THE PRODUCT: USUALLY ABOUT 2 WEEKS***

SKU: GZCFZ-TR Category:

Description

***ATTENTION THERE IS A LEAD TIME ON THE PRODUCT: USUALLY ABOUT 2 WEEKS ***

THIS MODEL ALLOWS YOU TO CONTROL BOTH THE ZOOM AND THE FOCUS ON EITHER CANON OR FUJINON LENSES VIA AVAILABLE FOCUS ADAPTERS.

 

 LINK’S BELOW ARE CHART’S THAT TELL YOU IF YOUR PARTICULAR LENS HAS INTERNAL SERVO’S FOR ZOOM AND FOCUS:

(YOU WILL NEED THE ENTIRE MODEL NUMBER FROM THE TOP OF THE LENS example: J22eX7.6 BIRSE)

                                                                      Canon Lens Chart                     

Canon Lens Model Breakdown Chart

Fuji Lens Model Breakdown Chart

The newer Canon lenses that have internal focus servos will have a 20 pin connector on the bottom of the lens take a look:

                                                                               

Canon Lens 20-pin Location Reference

This custom ergonomic unit allows the operator to control the zoom while holding the Gimbal handle. Compatible with most Canon and Fujinon lenses (for controlling zoom function). It also has the ability to control focus as well (depends on lens model). Unit will control focus (hardwire) via Bartech Focus Device and with new G-Focus device. This unit also comes with zoom speed control as well as a switch to control zoom direction, there is also a direction switch for focus direction too.

This is basically an “ala cart” unit where you buy the connectors/adapters that are required. I put this one together so that ops that have certain lenses and or focus systems can custom tailor this unit to best fit their needs.

From the Focus Adapters page you can order the adapter cable (lens model dependent) that you need, as this unit will allow you the ability to control focus on many different focus devices and lenses.

This unit will come standard with a zoom adapter from Canon to Fuji unless you need something completely different and have contacted me already.

Additional information

Weight 1.0 lbs
Dimensions 4 × 4 × 4 in
Gimbal Handle Diameter

, , , , , , , , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.